The IBQC Model Building Act and Türkiye: A Comparative Look

Introduction
Given its immense construction export scale, it can be argued that Türkiye’s building regulation carries international significance. In ENR’s 2026 ranking of the world’s 250 largest international contractors, Türkiye featured 48 firms – 2nd globally only to China (75) and ahead of the U.S. (41), U.K., Germany, France and others. Ranked 7th worldwide in international contracting revenue, Turkish contractors generated $24.9 billion in 2025 (up from $20.8 billion in 2024). Since 1972, they have delivered 12,952 projects across 138 countries, exceeding $567.8 billion in value.
Australia provides a useful contrast. It hosts a top 10 global construction market focused almost entirely on domestic building. Türkiye has a smaller home market, but its contractors export practices and standards across 138 countries. Comparing both against the IBQC Model Building Act illustrates how building regulations serve a large domestic market versus a major global exporter. (Australian building legislation is compared in other articles.)
The International Building Quality Centre (IBQC) published the IBQC Model Building Act in February 2026 as a reference statute covering the regulator, permits, inspections, product safety, practitioner registration, liability, insurance and dispute resolution.
Türkiye already features key IBQC Model Building Act elements: mandatory contractor registration, 15-year liability for inspection firms, and public sanction registers. However, it lacks an independent regulator, compulsory liability insurance, joint final inspections, and a specialist tribunal – gaps addressed by an opposition bill filed in October 2026, which is before a parliamentary committee and whose prospects are uncertain[1]. Additionally, Turkish reforms typically react to major earthquakes rather than following scheduled review cycles.
As a framework, the IBQC Model Building Act allows for local adaptation. Türkiye is a good example of this by regulating craftsmen and site managers, tracking jobsite concrete, and penalising suppliers who sell building products to unauthorised projects.
Turkish legal tradition
The Republic of Türkiye is a civil-law jurisdiction that adopted its core legal framework from European models in the mid-1920s, including a Swiss-derived Civil Code and Code of Obligations, and progressively, between 1922 and 1937, French-style constitutional secularism (laïcité). Under statutory rules, written codes serve as the primary source of law, while judicial decisions and scholarly opinions are formally treated only as non-binding persuasive guides.
In practice, however, case law plays a pivotal role in interpreting and applying the law. Binding precedents are set by “unification rulings” of the Court of Cassation (for civil and criminal courts), the Council of State (administrative courts) and Constitutional Court decisions, reflecting a broader convergence in civil- and common-law systems where courts define statutory meaning. Consequently, specialised areas like Turkish building law cannot be fully understood through statutes alone.
Regulation and oversight
The IBQC Model Building Act creates a standalone regulator; Türkiye runs building control from a government ministry, with municipalities issuing permits and private firms doing the inspection.
Under Part 2 of the IBQC Model Building Act, a Building Authority constituted by a Building Commissioner on a five-year term oversees the whole system, enforces the Act and supervises product safety.
In Türkiye, the Ministry of Environment, Urbanisation and Climate Change licenses inspection firms. Under Articles 2 and 3 of Law 4708, every building in the law’s scope must be supervised by a legal entity holding a ministry permit and doing nothing but building inspection[2]. A Central Building Inspection Commission and provincial commissions propose sanctions, which the ministry approves; Law 7579 refers to both throughout its new penalty provisions[3]. Building permits and occupancy certificates are issued under the Zoning Law by the competent administrations, mainly municipalities[4].
Sanctions are public. In February 2026, for example, the Government Gazette announced a one-year ban on new work for an Istanbul inspection firm for failing to supervise a building as the law requires. It also announced that the responsible inspectors would be recorded by the ministry and that a founding partner was barred from technical roles in other inspection firms during the ban[5].
The question for Türkiye is less whether it has a regulator than whether one accountable body, at arm’s length from both ministry politics and local development interests, would make enforcement more consistent. Potential new reforms point to one accountable body.
Permits and inspection
Türkiye divides the IBQC Model Building Act’s unified building official role between municipal permitting authorities and private inspection firms. While the IBQC Model Building Act recommends a single building official, state peer review for complex projects, and joint final inspections, Türkiye relies on private firms owned and staffed by licensed architects and engineers that supervise every building within the law’s scope, with the same mandatory inspections regardless of risk level.
The selection process for these inspection firms has continuously evolved over time, with electronic ministry assignment replacing direct owner selection in 2019. Since 1 January 2019, the ministry has assigned inspection firms electronically, and since June 2025, owners of buildings up to 500 m² may choose their own firm. For larger buildings in provinces with enough firms (more than 45), the owner is offered one firm and, if they decline it within 3 business days, a second.
Further updates in 2026 under Law 7579 added requirements for daily site records, implemented electronic tracking of which buildings each inspector works on and when, and removed inspector names and signatures from building permits. Despite these reforms, Türkiye does not have the IBQC Model Building Act’s requirement for a mandatory joint final inspection before occupancy.
Practitioner registration and discipline
Türkiye is closer to the IBQC Model Building Act on practitioner registration than most countries. Since 2019, building contractors have required ministry authorisation numbers and capacity grades. Türkiye does not have, however, a single board covering all practitioner classes and the IBQC Model Building Act’s show-cause procedure.
The IBQC Model Building Act’s Building Practitioners Board registers seven practitioner classes, sets qualification, insurance and fit-and-proper requirements, and may impose sanctions including disqualification for three years (Part 5).
Contractors: A 2019 regulation requires contractors undertaking permit-required building work to hold authorisation numbers and capacity grades based on economic, financial, professional and technical capacity[6]. The ministry’s “ŞANTİYE-M” system records contractors, site managers and certified tradespeople. Under Law 7579, using a false classification certificate results in sealing the building and cancelling the contractor’s authorisation number for five years[7].
Inspectors, architects and engineers: Inspection professionals are ministry-registered, with sanctions published against named practitioners and firms. Law 4708 bars inspectors responsible for three sanctions within five years from technical roles for three years. Law 7579 extends the same restriction to soil-survey firms and their staff[8]. Designers and other engineers are regulated mainly through professional chambers. A January 2026 bill proposes tiered competence levels for engineers in design, site management and inspection[9].
Both systems provide for career restrictions of up to three years. The key difference is procedure: the IBQC Model Building Act requires notice, an opportunity to respond and written reasons, whereas Turkish sanctions proceed through commission proposals and ministry approval, subject to challenge in the administrative courts.
Targeting building products
Türkiye exceeds the IBQC Model Building Act on concrete traceability and soil survey accountability, though it lacks the IBQC’s non-transferable duty covering all supply chain actors from designer to installer. While general market rules mirror the EU framework under Law 7223, recent legislation targets the country’s primary earthquake risks.
Under Law 7579, concrete producers face fines up to TL 500,000 for failed core tests, unpermitted delivery, or missing/mismatched QR delivery notes. Additionally, starting 31 December 2026 in a pilot province, ministry-licensed firms must conduct soil surveys, with fees managed through escrow. False reports or testing violations trigger severe fines and license revocation.
Türkiye’s tightest product regulations focus directly on its two greatest earthquake vulnerabilities: concrete quality and site ground conditions.
Occupancy, maintenance and records
Law 7579 marks Türkiye’s first step toward the IBQC Model Building Act’s lifetime safety philosophy by introducing periodic fire-safety checks for occupied buildings. While municipal occupancy certificates still mark the end of construction and trigger inspection firm liability, Turkish law is shifting from a single “approve once” threshold toward ongoing verification.
Under the updated Zoning Law, building owners must schedule periodic fire-safety inspections carried out by local fire departments or ministry-certified experts. Found deficiencies must be resolved within a deadline set by the municipality (of no more than 6 months), with secondary regulations defining the exact building categories, inspection intervals, and fee structures. However, this regime remains narrower than the IBQC Model Building Act’s comprehensive duty to maintain all essential building services and keep a permanent digital building manual.
Liability, limitation and insurance
Türkiye offers long liability windows for structural defects but provides minimal financial backing. Contrasting with the IBQC Model Building Act’s 10-year liability limit, proportionate liability, and mandatory insurance mandates, under Turkish law, general contractor liability lasts 5 years after delivery – extending to 20 years for gross fault – while private inspection firms carry a 15-year statutory liability for load-bearing structures. However, the owner must report defects promptly, and hidden defects as soon as they are discovered, to ensure the work is not treated as accepted. In practice, this limits the long periods considerably.
However, practitioners face no statutory requirement to hold professional liability insurance. Beyond basic owner earthquake coverage (DASK) and ministry performance guarantees, financial recourse remains limited. However, Law 4708 once had an insurance provision, but it was replaced in 2015, which indicates this gap to be a policy choice rather than an oversight.
Two new opposition bills[10] would introduce compulsory building insurance and a guarantee fund.
Disputes and enforcement
Türkiye possesses robust administrative enforcement mechanisms against non-compliant building, but differs from the IBQC Model Building Act’s suggestion of a centralised Building Appeals Tribunal. Instead of a single specialist body handling permits, orders, and practitioner disputes, Turkish building disputes are split between the administrative courts (permits and sanctions) and the ordinary courts, where consumer courts hear buyer claims and commercial or civil courts hear contract disputes, often after mandatory mediation.
For enforcement, municipalities hold strong authority under the Zoning Law to halt work and seal sites, and can order demolitions and impose fines. Recent updates under Law 7579 expand administrative fines to fire-safety and energy-certificate experts while treating fire-safety failures with the same urgency as unsafe buildings. The 2026 building safety bill[11] proposes a fast-track construction dispute panel, bringing it closer to the IBQC tribunal model.
Codes specific to jurisdiction
In several areas, Turkish law covers ground the IBQC Model Building Act leaves open or goes further. Whether each is better in practice depends on enforcement, and several of the tools are too new to have a track record.
Areas specific to the jurisdiction or left open by the IBQC Model Building Act
- Craftsmen/tradespeople and site managers. The IBQC Model Building Act’s definition of “building practitioner” stops at builders, designers, engineers, building surveyors and project managers (Schedule 1). Türkiye records certified craftsmen and site managers alongside contractors[12]. Since Law 7579, site managers must keep a daily log of the work done and the craftsmen on site[13] This is still being phased in.
- Concrete and testing laboratories. The IBQC Model Building Act treats products generally and mentions accredited laboratories only for listed high-risk products (s 3.14). Türkiye regulates concrete as delivered to site. Producers face fines of TL 500,000 for failed core tests and TL 250,000 for missing or mismatched QR-coded delivery notes. Testing laboratories need a ministry licence under Law 4708[14].
- Soil surveys. Unlike the IBQC Model Building Act, which requires geotechnical reports but does not regulate providers, Law 7579 requires licensed survey firms and public escrow for fees. False reports can trigger licence cancellation and liability for resulting building damage[15].
- Suppliers to unauthorised buildings. Law 7579 imposes a TL 500,000 fine on anyone supplying or holding ready-mix concrete for buildings lacking required permits or approvals. Unlike the IBQC Model Building Act, this extends enforcement beyond owners and builders to the supply chain that makes unauthorised construction possible[16].
Where Turkish legislation goes further
- Inspector Liability: Turkish inspection firms carry a 15-year statutory liability for structural load-bearing systems and 2 years for non-structural parts (Law 4708), whereas the IBQC model places no direct liability on certifiers.
- Concealed Defects: Gross contractor fault extends liability to 20 years under the Code of Obligations, with no time limits for consumer homes where defects are concealed by fraud or gross fault – exceeding the IBQC Model Building Act’s 10-year longstop.
- Contractor Grading: Türkiye grades contractors by financial and technical capacity to cap maximum project sizes, rather than just registering them by building type (residential vs. commercial) as in the IBQC model.
- Fire Checks: Law 7579 mandates periodic fire-safety inspections for occupied buildings with up to a 6-month remediation deadline, going beyond the IBQC Model Building Act’s unmonitored owner maintenance duty.
Caveats: Law 7579 dates from May 2026, soil-survey licensing begins only on 31 December 2026 in a pilot province, and the fire-inspection regulation has yet to appear.
Pending reform: the October 2026 building safety bill
The Bill on Building Safety in Construction Works[17], filed by an Izmir opposition MP on 5 October 2026, proposes a unified building safety chain covering design, materials, construction, inspection and operation. It resubmits a December 2025 bill[18] and has been referred to a parliamentary committee. A companion bill on expertise, inspection, insurance and compensation[19] was filed the same day. However, opposition bills rarely become law, so this can be characterised as merely a proposal and not a likely change in the law.
Key proposals in the bill and their IBQC Model Building Act counterparts are:
- Independent regulator (art. 7): An autonomous 15-member institution – similar in role to the IBQC Model Building Act’s Building Authority, but more independent of government, since the IBQC authority is minister-appointed.
- Digital building passport (art. 5): A lifelong record of permits, inspections, insurance, plans and manuals (IBQC Model Building Act, ss 4.27, 4.33).
- Practitioner competence (art. 3): Chamber registration, certified technicians and on-site competence cards (Part 5).
- Compulsory insurance (art. 9): Five policies, including professional, third-party and 10-year liability cover (s 6.10).
- Liability (art. 13): Joint and several liability for specified parties where unqualified staff or clear negligence causes death or injury, contrasting with the IBQC Model Building Act’s proportionate-liability approach (Part 6).
- High-risk buildings (art. 8): Safety officers and periodic inspections for residential buildings over 18 metres tall or seven storeys (s 4.24).
- Rapid dispute resolution (art. 15): Panels appointed within seven days and issuing binding decisions within 15 days, resembling the IBQC Building Appeals Tribunal (Part 7).
If enacted, the bill would address gaps in independent oversight, compulsory insurance, digital building records and dispute resolution. Its joint and several liability model departs from the IBQC Model Building Act’s proportionate approach. As of October 2026, it remains before a parliamentary committee and has not been adopted. Generally, opposition-initiated bills do not pass.
Conclusion
Türkiye’s building regime is strong where its earthquakes exposed failures: contractor registration, traceable concrete, licensed soil surveys and long liability for inspection firms. Compared with the IBQC Model Building Act, it is currently weaker on independent oversight, insurance, a joint final inspection and a specialist forum for disputes. The October 2026 bill would close most of those gaps if enacted, but opposition bills seldom pass.
The IBQC Model Building Act offers Türkiye an institutional structure, while in the other direction, Türkiye offers the IBQC Model Building Act tested, site-level controls for safety in a seismic jurisdiction.
Türkiye’s system is strong on registration and traceability, and compared with the IBQC Model Building Act, it gives less independence to inspection and, currently, less insurance coverage to owners.
About the author: Levent Karaca is an Associate/Construction Lawyer and Assistant Practice Manager at Lovegrove & Cotton Construction & Planning Lawyers. He practises in construction law with particular expertise in Owners Corporation (strata) matters, advising OCs, property owners, builders and building practitioners on building defects, regulatory compliance, dispute resolution and litigation. He regularly assists clients in VCAT proceedings and complex building disputes. He currently works offshore and is domiciled in Türkiye. He holds a current Australian practising certificate, issued by the Legal Services Board of Victoria, Australia and is not entitled to practise in Türkiye.
Disclaimer: This article provides general information only and does not constitute legal advice. The authors are affiliated with Lovegrove & Cotton, Australia, and are not admitted to practise in Türkiye. Neither the authors nor the firm holds itself out as authorised to practise there. For advice on Turkish law, consult a lawyer qualified to practise in Türkiye.
This article is a comparative overview prepared for general information only. It is not legal advice and should not be relied on as such in Australia, Türkiye or any other jurisdiction.
The author’s practising certificate is issued in Australia. Nothing in this article is advice on Turkish law. Readers who need advice on Turkish law, including the Zoning Law, the Building Inspection Law or any pending or current legislation, should consult a lawyer admitted to practise in Türkiye.
The article reflects independent views and analysis. The law is stated as at 26 October 2026 and is drawn from the primary sources listed below. Turkish legislation, regulations and the bill discussed here may have changed since then, and the bill may be amended, adopted or lapse.
Image Acknowledgements:
The digital renders used in this article were developed collaboratively by Lovegrove & Cotton and ChatGPT
[1] Bill on Building Safety in Construction Works (originally “İnşaat İşlerinde Yapı Güvenliği Hakkında Kanun Teklifi”) Esas No. 2/3912
[2] Law 4708, mevzuat.gov.tr; ministry text
[3] Government Gazette (Resmî Gazete, 22 May 2026).
[5] Government Gazette (Resmî Gazete), 10 February 2026
[6] Government Gazette, 2 March 2019.
[8] Law 4708; Law 7579, art. 24
[10] Bills 2/3912 and 2/3924
[11] Bill 2/3912
[12] Government Gazette (Resmî Gazete), 2 March 2019
[13] Law 7579, art. 12, Government Gazette.
[14] Law 7579, art. 22, Government Gazette; Law 4708, mevzuat.gov.tr
[15] Law 7579, art. 24
[17] Bill No. 2/3912
[18] Bill No. 2/3422
[19] Bill No. 2/3924
Sources
Section references to the IBQC Model Building Act are to the IBQC’s The Model Building Act (February 2026).
Government Gazette (Resmî Gazete)
- 22 May 2026, no. 33261: Law 7579
- 10 February 2026: sanction notice against an inspection firm
- 12 June 2025: amendment to the communiqué on electronic assignment of inspection firms
- 2 October 2024: Constitutional Court decision E. 2024/8 on Article 478 TBK
- 2 March 2019: Contractor Classification Regulation
- 29 December 2018: communiqué on electronic assignment of inspection firms
- 10 July 2013, no. 28703: Construction Products Regulation
Legislation (mevzuat.gov.tr)
- Law 3194, Zoning Law
- Law 4708, Building Inspection Law and the ministry’s consolidated text
- Law 6098, Code of Obligations
- Law 6305, Disaster Insurance Law
- Law 6502, Consumer Protection Law
- Law 7223, Product Safety and Technical Regulations Law
Legal tradition
- Constitution of the Republic of Türkiye, Law 2709 (mevzuat.gov.tr)
- Civil Code, Law 4721 (TKGM text)
- Constitutional Court decision 1996/5 on Article 45 of the Court of Cassation Law
- Constitutional Court decision 2022/152 on Article 45 of the Court of Cassation Law
- Constitutional Court (statistics)
Parliament (TBMM)
- Incoming papers, 19 December 2025: bills 2/3421 and 2/3422
- Bill on Building Safety in Construction Works 2/3912, text and rationale, October 2026
- Expertise, Inspection, Insurance and Compensation Bill 2/3924, October 2026
- Bills referred to the Public Works, Zoning, Transport and Tourism Committee
- Bill on Building Safety in Construction Works, text and rationale
- Engineering Competence Bill, 2/3500
Official statements on overseas contracting